OEM under the Headunit bin with door - Submitted by Vampyrate Materials Needed: Phillips Head Screwdriver Instructions: 1. Remove the dash fascia. See this Do It Yourself Guide for help. 2. Unscrew the six screws that hold the old bin and headunit (they are attached with a bracket). 3. Remove the headunit and unscrew the bracket. 4. Slide the headunit into the new bin (part 00271-84004) and line up the screw holes and screw in one side. Don't worry about making both sides even, that is why you are doing it on one side only first. 5. Line up the other side of the headunit with where the first side was to make it even and also screw that side in. Now just put the headunit and bin back into place. 6. Screw in the bin and headunit into the dash with the same six screws from earlier (it lines up perfectly and no modification is needed, since this is an OEM piece from Hyundai). 7. Reinstall your dash and you are all done. Picture with bin door open. Notice it fits a couple of CDs quite well: Click here to discuss this Do It Yourself Guide.

Click here to Return to the Forum · Click here to return to DIY Main Page