Headlight Haze Removal - Submitted by ArunSenior04 Materials Needed: 2000 Grit Wet Sandpaper (available at most auto stores in paint section) Meguiar's Plastic Cleaner & Polish Bucket Towel Total Cost: Less than $10 Total Time: At least an hour per light This is how mine looked (after pics below directions): WARNING: I AM NOT RESPONSIBLE IF YOU USE THE WRONG GRIT SANDPAPER OR PRODUCT TO DO THIS...... 1. Get some luke warm water in a bucket. 2. Tear a piece off the sandpaper and dip it in the water. 3. Begin to sand the headlight. 4. Every few seconds (5-10), dip the sandpaper in the bucket of water. 5. About every 5-10 minutes, wipe the headlight off with a cloth. 6. Put about a quarter size amoint of the plastic cleaner/polish on a wax applicator, or towel, or spread it on the headlight using force. 7. Buff the polish off the headlight using a dry towel. (Note: You use force. Immediately you shield begin to notice a difference.) 8. Repeats steps 2-7 until you achieve a beautiful clear, smooth, headlight. (Note: When you start to sand up a sticky like substance, you are near completion.) I recommend that you wax them after you finish to prevent the haziness from coming back. Pics After Cleaning.... Click here to discuss this Do It Yourself Guide.

Click here to Return to the Forum · Click here to return to DIY Main Page