HVAC Reverse Glow Faces - Submitted by TheBlackshinobi 1. Remove the dash fascia (See this DIY if needed.) 2. Remove the four screws that hold the HVAC unit in place. Pull it out and remove the plug from the wiring harness. 3. Remove the four screws from the back of the HVAC unit in order to remove the faceplate. 4. Gently pull on the knobs to remove them. 5. Set the white face guages on top of the HVAC unit. Line them up and secure them in place with 3M tape. 6. Put the faceplate back on. This helps hide the wires. 7. Put the knobs back on. 8. Put the white back piece on and screw down the faceplate. 9. Splice the three wires into one so that it will plug into the inverter. After you have the wires spliced or you got a splitter, tap into the cigerette lighter light wires so the inverter gets power when you have your lights on. Once that HVAC is back in one piece, reinstall it back in the dash. 10. Make sure all your connections are connected. Night picture: See this thread to discuss this Do It Yourself guide.

Click here to Return to the Forum · Click here to return to DIY Main Page