PDA

View Full Version : 1.8 crank

swifty
10-31-2005, 09:06 PM
Has any 1 put a 1.8 crank into a 2.0 and how did it work out?
Cypher
10-31-2005, 09:10 PM
what benefit do you see coming from this?
swifty
10-31-2005, 09:34 PM
what benefit do you see coming from this?
was reading older forums about changing rod/stroke ratio, and was not sure if any one actualy did it or not and how they made out.
VTElantra
10-31-2005, 09:38 PM
You mean stroking the motor? Bigger crank and rods, not smaller.
swifty
10-31-2005, 10:16 PM
You mean stroking the motor? Bigger crank and rods, not smaller.
I`m not sure I think smaller crank to slow rod speed? Help?
BLK02XD
11-01-2005, 12:29 AM
really low compression, and less power using our pistons and rods, or smaller displacement and less power using 1.8 pistons and rods. a waste of time really unless you were going to bore out the cylinders and get custom pistons and rods to keep displacement and compression, but lower piston speeds, even then its not a drastic difference. i think someone on rdtiburon was making some sort of 1.8/2.0 redz?