Xd Cai-03+ (cvvt)

[Fixer]

Ok. I've been road testing this for about 2 months now. I have no other info then the driver noticed an increase in MPG and HP. Of course this will vary.

I have no prices, no dynos, no nothing but 3 pics. I know..Lame..stop teasing...

but sorry..its all I have right now. give me a week or two and I should have updates.

Aj

http://sweepthis.com/upload/files/6/XD CAI/XD-CAI-VVT.jpg
http://sweepthis.com/upload/files/6/XD CAI/XD-CAI-VVT-2.jpg
http://sweepthis.com/upload/files/6/XD CAI/XD-CAI-VVT-3.jpg

[importspeed]

Great job on that engine bay :bowdown:,that CAI looks sweet. is that a name brand or custom made intake?and where does it end at(front of tranny or inside fenderwell?I have an 05 cvvt and would like info. Thanks

[FordFasteRR]

nice looking !

[pjc6281]

Its a little too close to engine and headers for me, but i like it alot. I wonder if that design can work with an auto, probably not...

[velantra]

It looks like the same route Injen/AEM used for the 97-01 Tiburon, except the route on this intake is more straightforward.

[BColeman]

I like the way this looks. It is very clean. I am a little aprehensive about my Accord CAI, and I think the one pictured here would be better placed with in my engine bay. Where can we get one?

[Fixer]

Thanks.

As far as the Auto..As of right now, its going to be released for MT only. When I get these going, I'm going to look for a 03+ Auto to fab one up.

Thoght you guys would have seen the BSE logo... =)

As far as closeness to the header, I'm looking @ the coating options, so it might not really be an issue. I was looking @ putting like the GK Tib, but there isnt room w/out doing a relocation kit for the battery.

[sleepergt]

hey fixer you may want to add a vibration bracket to keep the intake from vibrating. also i noticed that the position of the tb in 03-04, due to a friends car (paki), is slightly more to the left. as in mine 05 hatchback its more
centered. we couldnt believe it but its off like inches or less.


***nevermind i keep forgetting his is an 02. but it wouldnt hurt in double checking the position of the tb, it may determine the positioning/placement of the intake. ******

[Gun5]

i still dont see how much good these are going todo over ebay CAI's besides not being a royal PITA to cut down/ and fit

[Fixer]

there is a bracket there..just not pictured.

the test car is a 04.

when the time comes..hopefully in a week or so, I'm going to need the 01-early non VT 03 to fab one up on.

[velantra]

Thoght you guys would have seen the BSE logo... =)



Hmmm, is that a BSE big bore throttle body and/or BSE designed CAI?? So I guess the H.A.R.D. deal fell through but BSE will still make parts for Hyundai vehicles?

[pjc6281]

I dont think its h.a.r.d. but just bse making parts for us. Doesnt look like there is cutting involved for the 04s cause it a 2 piece set if u see the maf. Yea there might be brake pedal vibration if the pipe is touching the brake resivour.

[Keyan]

It won't fit an automatic at all.

And it's too close to to the headers.

:(

[sleepergt]

fixer it wont touch the brake reservoir correct?

[Fixer]

Yes BSE is still making parts for Hyundai cars... turbos, exhausts..suspenstion...


As far as I know it didnt touch the res. I will try to put it back on the car and make sure, but my test driver didnt say anything about it. I'll look @ the other pics I have and see if I can tell..but I'm going to say no it did not.


Keyan..like I said above..dont worry, I'm going to have one made for the Autos...

[sleepergt]

does bse have a website? and if so, what is the link?

[mtlelantra]

Isn't this for 04+ considering it has a MAF?

[peters73]

The picture does not show where the air filter cone ends up at. It could be a Ram Air Intake.

[Fixer]

they released the CVVT in mid 03.

if it was a SRI I would not have posted that it was a CAI.

[velantra]

does bse have a website? and if so, what is the link?
www.bseparts.com

[05TidalWave]

I like this route... I started CAI a long time ago and haven't gotten it done yet... PITA to cut the metal hole bigger. Mine wouldnt f----in fit.... I like BSE way...

[05xd]

Digging up old threads again I see?Did I miss where the price is located on the site,or is there not a price?

[soullesselantra]

yeah...i want one, but the site doesnt have it listed... :(

[Seinster]

Soulless, It's on the parts list.
It's a good looking intake.

[05TidalWave]

I couldn't find it either.. .LINK!?

[Seinster]

OK here you go,
http://www.bseparts.com/pdf/parts_list.pdf
From what I recall it's on page 3.

[soullesselantra]

thanks much, but either im still retarded or they dont have prices...lol...FREE CAI!!

[Vampyrate]

actually you have to pay for shipping and handling which is at least 800 for anything further than the front door

[Seinster]

800 for shipping and handling? LOL! That better be a typo. :D
You need to CONTACT THEM if you're interested.

[Vampyrate]

lol, yeah my mistake its 800 CDN for shipping and add another 2k if you are going furhter than than down the street :)

[soullesselantra]

theres alot of stuff to do....i think ill wait till tomorrow (monday) comes and try to call...i still like the free CAI idea...

[silversharkXD2]

RD tiburon has alot of threads about BSE. go read them. quite frankly im surprised we don't talk about them hear more than we do