Programing new keysless remote

[jeffv1970]

I did some searching tring to find out how to program a new remote. All I can find is something bout fliping switch on ETACS? Where is this. And Is this the correct thing to be doing?
Your help on this is appreaciated. :bowdown:

[hyunelan2]

Check the archives - I think there might be a picture of the switch somewhere in there. This sounds correct from what I remember. The ETACS box is located directly behind the ashtray - you'll have to pull the dash panel to get to it.

[fgummett]

Is this what you need..? found it on Elantra GT Club (written up by SouthPawBoston) Coding the Elantra's Remote... (http://elantragtclub.tripod.com/elantra/id309.html)

[jeffv1970]

Is this what you need..? found it on Elantra GT Club (written up by SouthPawBoston) Coding the Elantra's Remote... (http://elantragtclub.tripod.com/elantra/id309.html)
Yes thank you. :bowdown:

[Doohickie]

I see you have a 2001, so it should work. But for others who may see this and go to southpawboston's procedure, be aware that this does not work for 2004-06; you need the scan tool (I've talked to spb about this).

[Vampyrate]

yay for me staying XD on thsi one... anyway, time for wendy's before class

[Doohickie]

Anton wrote his article early in the 2004 model year and was not aware the ETACS had changed for that year.