PDA

View Full Version : LED taillights


skeetre
04-23-2006, 07:23 PM
I had my left brake light burned out, so I got some LED taillights. They look pretty nice. I thought we had 2 bulbs, one for brakes, one for normal night lighting... didn't realize it was one bulb. :)

Anyway, got 'em installed, I don't have anyone with me to tap the brakes for pics, so if you want pics, you'll have to wait.

I read a post earlier that the bass from the sub could cause the taillights to go out, so maybe that's what happened to mine. Shouldn't be a problem with the LEDs though.

SubZeDiZeD
04-23-2006, 09:33 PM
The problem I had with LED bulbs on my last car was that they didn't light up the entire tail light.... They just looked like 2 red circles in the middle of the tail light housing - didn't look all that hot at night. Does it do the same thing in the Elantra?

soullesselantra
04-23-2006, 09:57 PM
the LEDs tat are all front firing will...but if they are the matrix LEDs that would be hawt

cclngthr
04-23-2006, 10:10 PM
I have the matrix LED tail lights in both the turns and the brake/tail lights. In the daytime, it will show up as a small red area, but when it is dusk or cloudy, it will light up the whole area.

skeetre
04-23-2006, 10:27 PM
I have the matrix LED tail lights in both the turns and the brake/tail lights. In the daytime, it will show up as a small red area, but when it is dusk or cloudy, it will light up the whole area.

Yeah... I tested 'em earlier in the day, and you could see exactly where the LEDs were... at dusk when I left while ago.... they lit up pretty good, now that it's dark... they light up bright. I like 'em.

03SilverBullet
04-23-2006, 11:05 PM
I have the matrix LED tail lights in both the turns and the brake/tail lights. In the daytime, it will show up as a small red area, but when it is dusk or cloudy, it will light up the whole area.
Do you get hyper blinking with the LED turn signals?

Also I had LED bulbs in my brake lights and for some reason the spoiler light stayed on when I installed them, so I took them out.

skeetre
04-23-2006, 11:10 PM
I'll go check... I was going to go do some wiring on the safc2 anyway... to bypass the map clamp for now, so I'll see.

cclngthr
04-23-2006, 11:31 PM
Do you get hyper blinking with the LED turn signals?

Also I had LED bulbs in my brake lights and for some reason the spoiler light stayed on when I installed them, so I took them out.

I put 2 resistors on the brake light circuit and 2 on the turn light circuit. That solved the problem. I have a trailer light hookup and the diodes in that leak a tad. The resistors stopped that.

The LED's I have are a narrow view bulb. They are brighter and do show up better in the bright sunlight.

skeetre
04-23-2006, 11:43 PM
no fast blinking or anything. I got the 1157 led lights at autozone, says they can replace the ones for the elantra.

no flash
http://mudz.org/pix/car/new/led.jpg
http://mudz.org/pix/car/new/led2.jpg
with flash
http://mudz.org/pix/car/new/ledflash.jpg

03SilverBullet
04-23-2006, 11:49 PM
I put 2 resistors on the brake light circuit and 2 on the turn light circuit. That solved the problem. I have a trailer light hookup and the diodes in that leak a tad. The resistors stopped that.

The LED's I have are a narrow view bulb. They are brighter and do show up better in the bright sunlight.
I figured resistors would solve the problem, im just to lazy to get them and the LED bulbs.

cclngthr
04-24-2006, 01:53 AM
Mine look about like that. The leds that I have have 6 leds on the side and 18 on the end. I tried the light tower, where most of the led's are on the side and it was dimmer than what I have now.

menallychllngd
04-24-2006, 12:00 PM
when i tried this the led tail lights were actually a lot dimmer than a regular bulb. is this the case or no?

skeetre
04-24-2006, 12:36 PM
don't seem to be a 'lot' dimmer, maybe a tiny bit, but not really noticable to me.