PDA

View Full Version : Datalogging Cable


dangahboi
07-16-2004, 08:37 AM
Anyone ever made a datalogging cable before?

azwildfire
07-21-2004, 11:15 AM
if you mean the OBD-2 connector cable, buy a SAE J1962 Connector then use http://www.obdiicsu.com/Docs/LinkConnectors/SAEConnector_files/SAEConnector.asp for the pinout along with http://www.hmaservice.com/webtech/

i use cat 5 cable to make mine because that is what i have laying around, then i have a serial to cat 5 connector from some old flat wire unix terminals i use to interface with my laptop

dangahboi
07-21-2004, 04:01 PM
Do you know where the diagnostic port is? (where I can plug in the dongle)

vsolo
07-21-2004, 11:14 PM
Take your time & look it up, altho I did already, that is a very good site for info THANKS AZWILDFIRE

http://www.obdiicsu.com/Docs/DLC_Grid_files/slide0001.htm

ours (Elantra) is in section 2 get underneath & take a look :)

http://www.obdiicsu.com/Docs/DLCLocations/DLC%20Locations.html

dangahboi
08-10-2004, 12:10 PM
The 93 doesn't seem to be mentioned in there at all.
I'm actually having a difficult time finding out where the DLC is.

jameswing
08-10-2004, 01:16 PM
do you need special software to get the onfo?

dangahboi
08-10-2004, 01:17 PM
TMO. its free.