Where can I get rims drilled?

[Hitman]

I was gonna buy some used 17's and tires for pretty cheap, but after finding out that the bolt pattern was 4 x 100, was wondering if drilling them would be cost effective option or not. I don't think that I would wanna spend more than $60 for all four.
Aside from whether it would look good or not, I was wondering where does one go to get rims drilled and what does it cost? And is there anything to look out for when having them drilled?

[04 elantra cvvt]

Contact a good machine shop. They could probably do it for you, but I don't think it would be cheap.

[hyunelan2]

Better to just buy the correct rim pattern. I don't know any place I would trust to get those drilled exactly correct. You don't want any wabbles at 60 mph.

[watson80]

Yeah I agree you are better off buying the right ones from the start.

[XTRAWLD]

Drilling holes for the rim...I came across this one time long ago...heard it through the grapevine...someone did it.....wasn't pretty. Basically the holes were elongated to make sure the pattern would line up.......there wasn't much room to play with so the area was pretty weak when all was said and done. The center cap couldn't stand the extra pressure and with time the rim eventually broke....accident occurred......oy. If you have enough of the rim to play with, the sight doesn't look all that wonderful either. Seriously, find a rim with the right bolt pattern - it's the safest idea.

[watson80]

Better safe than sorry you dont want a wheel flying off!

[jameswing]

Yeah get the correct wheels. you don't want to mess up a good set of rims by drilling messed up holes in it.

[Hitman]

Well I'm convinced. iksnay on the rillingdray of the imsray. Thanks for your help fellas.
Not to get off track but from what I have seen 4x114.3 is equivalent to 4x4.5, correct?

[hyunelan2]

That is correct. 4-bolts at 114.3mm [or 4.5 inches]

[yevRPS]

no offense but this sounds ricey rice to me aside from the fact that it's rather unsafe

[04 elantra cvvt]

As we have said, I would take the money that you were going to spend on the used wheels, and the money that you would use to have them drilled, and get the right set. You will be much better off in the long run.