Compatable Oil Pans?

[Keyan]

Since our BETA2 block is very similar to the old mitsu blocks, has anyone checked to see if the oil pans are interchangeable? If they are...well think about the possibilities!

(especially the 4g63T pans with the turbo return line...)

[KeWLKaT]

Dude....

Just tap it....


Damn....

and you're going to be an automotive tech? :confused:

[WytchDctr]

If your going to do that make a dry sump system for it.. woot! for less windage.

[Keyan]

Dude....

Just tap it....


Damn....

and you're going to be an automotive tech? :confused:


what the **** does me being an auto tech have to do with morosco selling an aluminum mitsubishi oil pan?

[Cypher]

keyan... sometimes you just need to calm down dude. he was just playing. you're on here enough that you should realize that!

[KeWLKaT]

hahaha keyan keyan keyan :D:D:D

Btw WTF is morosco, i've only heard about moroso until now...

[bfgoedeke]

Moroso is a popular aftermarket hi-per parts maufacturerer. Mostly for ford,chevy and chrysler. Alot of these outfits are starting to get into imports..

[KeWLKaT]

Moroso is a popular aftermarket hi-per parts maufacturerer. Mostly for ford,chevy and chrysler. Alot of these outfits are starting to get into imports..

re-read my post CAREFULLY.

[Keyan]

re-read my post CAREFULLY.


dude stop chewing me out. is it really that funny? None of your posts in this topic are actually about THE TOPIC.

Screw it, this thread is already off course. If I could delete it I would. :rolleyes:

[KeWLKaT]

wtf keyan i was talking to bfgoedeke..............

man.. panties up in a bunch...

[Keyan]

wtf keyan i was talking to bfgoedeke..............

man.. panties up in a bunch...


whatever. alcohol in the system now. all better :)


So yeah. I posted thinking outloud because of the moroso because there are built in flanges for turbo oil drains and stuff and 4g63Ts have oil drains built into the pan stock...and if i can bolt up a pan that will work, is more safe than drilling a hole and tapping it etc etc.

[Cypher]

i want alcohol in my system!!! ahhhhhhhh. buy it and find out. if it doesn't work return it :tongue:

[KeWLKaT]

for gods sake why not just grab a scrap beta2 pan?

BETA1 PANS DONT WORK BY THE WAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!

I read something about the two long bolts right next to the bellhousing...

[evan938]

whatever. alcohol in the system now. all better :)

sorry to go O/T because i really wanted to stay on topic..

but when i read this, i started laughing so hard (at work), i almost got in trouble for being on the internet because my boss started walking over to see what was so funny.

i had to tell her it was someones voicemail message

so keyans an alcoholic now....oooohhk

:abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol: :abovelol:

[xxxmonoxidechil]

for gods sake why not just grab a scrap beta2 pan?

BETA1 PANS DONT WORK BY THE WAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!

I read something about the two long bolts right next to the bellhousing...
why dont they work, we use the beta2 pan on our beta 1's since there aluminum stock. so if we can do the swap, why cant you?

[jalmir]

^^^

good one!!!

wanna know also!

[KeWLKaT]

I said I read something, lol.

not sure.

it's about those two long bolts on the (tranny) side of the pan... mayeb it works for you guys but the opposite is not true?

[xxxmonoxidechil]

well our beta1's have a stamped steal oil pan, then an aluminum brace that is bolted to the trans instead of how the beta2 has all that as one piece. so if u wanted a beta1 set up, u would also need that aluminum brace, thats the only thing i see as a problem.

i dunno why you would really want a beta1 pan though, maybe for boosted applications since it would be better to tap for an oil return, but thats about it.

[KeWLKaT]

lol, thats the whole point.

tapping aluminium = a *****. from experience. lol

[Jonny666]

It wouldnt be sooo bad cept i can never hold the danm tap strait!!!! That's it im gonna invent something that makes sure you tap strait and then sell it for a million bux!!!!!!
Then tapping 1/16" aluminum would be easy as pie!!!!!
tapping 1/4" would be easyer than kicking a 2 year old in the face!!!!!!
IM GONNA BE RICH!!!!!!

[tharptroy]

just tap the block man, its not that hard

[KeWLKaT]

blah. tapping the pan works for me until now :)