2006 Xd2, Obd2???

[ChrisS95TA]

I have an AutoXray scanner that I used previously for my '05 TransAm...are the XD2 cars OBD2 (OBD-II)??? If so I can proabably upgrade the scanner which would be helpfull at some point. Thanks for any input :bowdown: :bowdown:

[Cypher]

i'm pretty sure all cars after the mid 90's were OBD2. in any case your car is defintely obd2

[04 elantra cvvt]

Everything make since 96 is OBD-II. Federal mandate.

[bfgoedeke]

Make sure your scanner has the Controller Area Network ( CAN ) protocol, otherwise it might not work. Vehicles after 2001 - 2002 have it in their ECU's. If you used it successfully on your 05 TranAm, you should have no problems...

[ChrisS95TA]

Make sure your scanner has the Controller Area Network ( CAN ) protocol, otherwise it might not work. Vehicles after 2001 - 2002 have it in their ECU's. If you used it successfully on your 05 TranAm, you should have no problems...


My 05 TransAm was OBDI, with a special connector that is almost identical to the OBDII ones. I have the Autoxray scanner and they sell a cable and also an upgrade that says it will work for any late model Hyundai. I will just call them to make sure, the cable and upgrade are over $100 :(

[Mark_Z28]

I have an AutoXray scanner that I used previously for my '05 TransAm...are the XD2 cars OBD2 (OBD-II)??? If so I can proabably upgrade the scanner which would be helpfull at some point. Thanks for any input :bowdown: :bowdown:


Thats got to be a typo, there has been no Trans Ams since 2002, but yes they to were OBD2 so it will work as far as getting codes.

[Cypher]

damn i didn't even notice that!

[Mark_Z28]

His name does say ChrisS95TA, bet he meant 95 which is OBD1. He just keeps putting 05 instead of 95.

[Cypher]

he made the mistake twice tho... you would think he'd have noticed it or been able to hit the "9" at least once.

[HYTECH]

in 95 alot of gm cars were obd2 but still had the obd1 connector my scan tool has the adapter for the 95 gm vehicles. i needed it for my 95 blazer it had the obd1 conector but i had to select obd2 on the scanner

his scanner could be obd2 and just plug right in depending on the adapter he was talking about

[Mark_Z28]

I have run into that on 95 GM cars, some were still OBD1 and some were OBD2, and some wouldnt read with either one.

[ChrisS95TA]

he made the mistake twice tho... you would think he'd have noticed it or been able to hit the "9" at least once.


Yes it is 95...

Sorry....I type fast :)

[SilverElantra]

Everything make since 96 is OBD-II. Federal mandate.

actually federal mandate in 96 but there are VERY and i mean VERY few who actually started using it in 94 and 95