its not a elantra but its pretty close

[04_tuscani]

Ok ok ok, so I know it's been a while and a lot of people are doubtful. But finally being released is Nor-Cal's 1st v6 turbo tiburon, the video is just a start up of it running. Dyno-tune is for another day:

Start-up try #1:
http://www.youtube.com/watch?v=dorGcm99Ki8

Start-up try #2:
http://www.youtube.com/watch?v=vAYW3uNVFq4

My shop managers ZO6 rev up:
http://www.zippyvideos.com/4369529566459516/pc280038/

The car at the shop:

http://i3.photobucket.com/albums/y98/sungeun6985/Turbo%20Project/1.jpg

Pictures of the engine:

http://i3.photobucket.com/albums/y98/sungeun6985/Turbo%20Project/2.jpg
http://i3.photobucket.com/albums/y98/sungeun6985/Turbo%20Project/3.jpg

The cars at the shop (some friends):

http://i3.photobucket.com/albums/y98/sungeun6985/Turbo%20Project/5.jpg
http://i3.photobucket.com/albums/y98/sungeun6985/Turbo%20Project/4.jpg

The shop manager's C5 ZO6:

http://i3.photobucket.com/albums/y98/sungeun6985/Turbo%20Project/6.jpg

[Levonida0103]

looks amazing

[Slapshotman7]

^^ Agreed. I'll take a look at the video's when I'm not at work.

[06elantra]

niiiice

also loving your boss's Z06 as well...

[burkej62]

Numbers ? Dyno sheets? and what motor work you do? That can't be a stock dleta bottom end

[04_tuscani]

Numbers ? Dyno sheets? and what motor work you do? That can't be a stock dleta bottom end

numbers and dyno sheet i dont have bc i stated in the first post i havnt dyno tuned it yet. motor work if u mean internals none.

but thats what i got done for perfomance. and yes its a stock bottom end. im only running 4psi

PERFORMANCE:
Next Generation Motorsports Single Turbo Kit
Next Generation Motorsports IceBox Upper Intake Manifold
Next Generation Motorsports Stage 3 Lower Intake Manifold
Next Generation Motorsports MafterBurner 2 Fuel Tuner
Next Generation Motorsports Battery Relocation Kit
Next Generation Motorsports Stainless Steel Bolt Kit
Ripp Modifications 310cc Injectors
Custom 2.5" Exhaust
Weapon-R Engine Damper Kit
Gyrex Grounding Wire Kit

[burkej62]

Curious to see how this goes if you turn boost up ... What are you using for fuel mange?

[04_tuscani]

im not going to turn up the boost. or atleast past 8psi.

im using a ngm mafterburner

[evan938]

looks like a good setup...as for the c5 z06, i love em. we got a local guy running on w/ heads, cam, stg5 clutch, and like a 100 or 150 shot of n2o (sure hes got other little things)...last month he ran 10.6s at i want to say 139ish. id have to get the video

[04_tuscani]

my shop manager has high cams, exhaust, basic bolt ons, and only has 450. but thats bc hes more into road courses.

[06elantra]

im not going to turn up the boost. or atleast past 8psi.

isnt that how all turbo ppls start out at one stage?

the bug will eventually hit.. to wind the boost up and see how much more it really has im sure

[KeWLKaT]

****.... no intercooler

have fun

i hope for you that that icebox doodad works

[soullesselantra]

holy ticking batman...check the oil much?

[KeWLKaT]

never mind... the icebox doesnt even seem to be working atm and is no connected to anything lol

[04_tuscani]

Ok, so I know you guys have been waiting for a dyno video. But, we ran into a problem while dyno tuning today. We got a small oil leak from the oil return line to the pan. So we couldn't finish the tune for today since we started at 8pm and ended around 9:30pm.

So from the data we collected my AFR at idle is about 14:1 and when I am at WOT it was about 11.9:1 after a quick tune. We didn't get the numbers I wanted due to the fact that we didn't finish the tune and the oil leak. What I got was 192whp and 215wtq. Not to shabby with a light tune and a oil leak huh? So they are going to fix the oil leak tomarrow and possibly change the oil return line TC sent because its not long enough to fit the correct way.

Here's the video:

http://youtube.com/watch?v=9tpSXl6M7eE

[Mahonroy]

What kind of powder did you use to powder coat those? E.g. what brand/name?