~turbo and other goddness~

[xxxmonoxidechil]

recieved a few things in the mail lately (even from members here), so i figured id take a few pics of what i have floating around the office. most of the basics are allready at the shop in a box though. still trying to decide which crank pulley to run though...

http://i5.photobucket.com/albums/y180/xxxmonoxidechild/tibby/turbotibtoys001.jpg

http://i5.photobucket.com/albums/y180/xxxmonoxidechild/tibby/turbotibtoys002.jpg

[joph09]

mmm alot of power making goodies there, have fun

are the obx and ark crank pullies the same size? can't really tell from that angle

[lilo shark]

pat, which turbo are you running?

[KeWLKaT]

cool, looks like my setup :)

[xxxmonoxidechil]

are the obx and ark crank pullies the same size? can't really tell from that angle

actually ones a OBX, the other is a Jspeed. both are the exact same measurements in size, but the OBX weighs 288 grams, and the jspeed weighs 302 grams.


pat, which turbo are you running?
the turbo im gonna run on this car was originally supposed to be my Turbonetics 72 trim. then common sense kicked in, and decided to use my smaller turbo for the tib, and use the big turbonetics on the probe since it would be able to handle such a large turbo alot easier.

the turbo itself is a Brand new HAHN racecraft super 20G thats been ported and clipped, and has the big CFM exhaust housing on it. but i need to send it back out again, im having the center section, and the exhaust housing sent out to be jetcoated before i install it. the oil pan i have is a beta2 aluminum, and thats allready out getting drilled and tapped for the oil return.

[burkej62]

A obx manifold?! NOOOO! You'll get 2,000 miles tops before it cracks . They look good but it splits right apart.

[xxxmonoxidechil]

^^

i allready reinforced all the welds. i have no worries about the manifold, if i did, i wouldnt install it. many people run them without issue, its common knowledge that you just have to re-do the welds, then its a great cheap manifold.