tri state help

[NY2002ElantraGT]

Im from Long Island and need help wireing up the Tib Multigauges. i posted on long island thread on NT.com but it seems like no one can help. so know im throwing this out to members in NY, NJ, PA, and CT. i will drive to you (within a couple hours) and buy you lunch or beers or both if you can help me install my multigagues. when i say help i mean help, im not some A hole who will sit there and watch. i have the harness labeled, i just am not the best at sodering nor do i know where to connect the wires to.

Somone please help me. i need to get this done before Hot Import Nights (July 21st)

Thanks in advance,

-Justin

[ArunSenior04]

You can do this yourself. It takes time, but patience is the key. The hardest part is trying to splice into the 3 wires under the dash. Everything else is easy. Took me like 8 hrs over 2 days to install lol.

When you do install them, you want to solder the connections nicely. You dont want any of them coming loose while driving, cause the gauges will act up. Otherwise, its pretty straight forward. Not too difficult, just a few places hard to get to.

[vsolo]

did you look at

http://www.elantraxd.com/DIY/multigauge.php

I'm not sure but I think there is a difference between the 4 & 5 door wiring, hope I'm wrong.

It is my son's post & I know it works, he put alot of time into it & posted pictures :)

[NY2002ElantraGT]

im getting help from a Tib owner who did this in his car. he asked for a wireing diagram. will the DIY be good enough?

[ArunSenior04]

From my understanding, the way Tibs hook this up, is alot different than how we install it on the EXD.

[NY2002ElantraGT]

talked to the guy helpin me,i sent him a link to the DIY. he said that its way better than the NewTib DIY and it will be no problem! Thank Vsolo, tell your son thanks too