Mission plate done! check it out

[Cypher]

i know i should've just added to the other thread but i wanted everyone to check it out!

http://aycu35.webshots.com/image/24154/2003137852348065821_rs.jpg

price will be $28 shipped!

[KeWLKaT]

****, it looks a bit plain without a logo or anything....

but still looks awesome!

[Cypher]

he said he can make it custom so if you have a logo you want added to it he can do it :)

[KeWLKaT]

Cool!

So is it on his site yet?

And does the double sided tape come with it?

[PSUsouthpaw]

looks really good.

[Munky]

Can someone add the picture as an attachment, please?

[hyunelan2]

You guys need to get better jobs so images aren't blocked, haha.

See attached.

[Munky]

You guys need to get better jobs so images aren't blocked, haha.

See attached.

Hahaha..I think the real irony is, I work for information services and full access to the entire Clarian.org domain..but yet I can't see certain images.

Thanks Mike.

he said he can make it custom so if you have a logo you want added to it he can do it :)

Where can I talk to him to have this done? I want this right in the middle of the plate, above ElantraXD:

http://i18.photobucket.com/albums/b114/MunkyMofo/mminv.jpg

[mayollo072R]

Awesome. I want whit a custom name on it AVANTEXD

[Ugzz]

i know i should've just added to the other thread but i wanted everyone to check it out!


price will be $28 shipped!

Ok so yes, i love it.

Now just tell us this:
Where/When/How/Who

[PanciLaan]

Nice, wanna have it.
But I have to find a nice logo for it, for above the Elantra XD.
Shipping all over the world I assume?

[Cypher]

I haven't checked his site yet. www.midnight-wolf.com is his site. if its not listed just email him adn i'm sure he'll hook you up!

[SuperGLS]

Damn. That looks nice. You guys should support this as he is one of the few people I allowed to use the EXD logo.

If anyone has any suggestions for another logo to go in the center let me know and I'll see what I can do.

[Munky]

I just emailed him, I'm definitely going to get one.

[lilredelantra]

ok i'm a big loser where does that go?

[SuperGLS]

It goes in the spot under the ashtray where you can put CDs or other stuff.

[Munky]

http://i18.photobucket.com/albums/b114/MunkyMofo/missionplatelocation.jpg

[lilredelantra]

alright thanks

[04GTboySC]

looks nice

[05xd]

I've actually thought about buying one for the Tib but haven't done so yet

[slyderdai]

Where can I talk to him to have this done? I want this right in the middle of the plate, above ElantraXD:

http://i18.photobucket.com/albums/b114/MunkyMofo/mminv.jpg
I have a vast collection of monkey drawings if i send you a file can you photoshop it to a line drawing instead of a rough sketch for me?

Now back on topic ........ I guess i gotta start looking through all my skethes to find the perfect piece for on it. that is soooooo Radass i gotta get some funds together asap.

[slow 2K2GT]

looks good buddy! I see those for the Tib but I didnt think they looked that good. Maybe you just got a nice one!

[BColeman]

Jim,

That looks terrific. I would have preferred the AvanteXD writing, but that one is cool by me.

$28 huh? Well, I'll be getting one, just not sure when. A couple of other people are in the need of my money right at the moment. Maybe next week I can order one up.

Show some pics of what it looks like in your car when you get yours ! ! !

[04 elantra cvvt]

Damn. That looks nice. You guys should support this as he is one of the few people I allowed to use the EXD logo.

If anyone has any suggestions for another logo to go in the center let me know and I'll see what I can do.

I plan on supporting this one for sure...

As for the suggestion, I say to use the cartoon-ish XD's that we used to have on the old website. Do you still have them anywhere?

I.E. these:

http://i124.photobucket.com/albums/p13/camaro_thunder92/exdshirt011.jpg

[SuperGLS]

I do have the original graphics, but not that graphic as it was put together by a different member. I might be able to work something up though.

[Munky]

It's the best I could do from chopping it off of a picture of a t-shirt.

http://i18.photobucket.com/albums/b114/MunkyMofo/exdcartoon.gif

[BobMs_wht2k2]

But how does stuff not slide around with that in there?

[SuperGLS]

I think the idea is not to put anything in there... or else it'll just get scratched up and stuff. I think.

[BobMs_wht2k2]

Oh. . . that's not very practical then is it?

[Munky]

Oh. . . that's not very practical then is it?

All for show, Bob.

The only thing I put there is my cell phone, which has little rubber feet on it to keep it from sliding.

[Ugzz]

oh damn, i wasnt thinkin it would get scratched up.. good point.
i kinda like to use that for my cell charger and such, i was hopin to do the same just push the stuff back a bit so you could see the logo..
i duno, even if it gets scratched i still might have to do this one, it looks so great!

[Munky]

oh damn, i wasnt thinkin it would get scratched up.. good point.
i kinda like to use that for my cell charger and such, i was hopin to do the same just push the stuff back a bit so you could see the logo..
i duno, even if it gets scratched i still might have to do this one, it looks so great!

If you're worried about scratching, spray a fine layer of clearcoat onto it.

[Ugzz]

awesome idea :D
is any brand better then others for this type of application?

[Munky]

I've always used Duplicolor, never had any problems so far. You can get a small can of spray clearcoat at Auto-Zone/Advance for ~$5.

[Ugzz]

contacted midnight-wolf about sale, here is his response:
--------------
Hello Rob,

Once they are finalized – they will be added to the website so people can make orders – Thank you for your inquiry
--------------

So i guess we should leave him alone until its on the main site. Or pesture him week to week asking about it till its up.. either way :D

[BobMs_wht2k2]

All for show, Bob.

The only thing I put there is my cell phone, which has little rubber feet on it to keep it from sliding.

Gotcha. Pretty much the antithesis of my car. :thumbsup:

[KeWLKaT]

Well the only thing that accumulates there for me is random stuff like hair, dust, ash, etc. etc. so if anything i'd be easier to clean ;)

[Ugzz]

antithesis -an·tith·e·sis-

From the Greek anti = against and thesis = position

* opposition
* A strong contrast between two ideas
* The opposite Of

And Of Course:
* The time of flower opening in a plant.

and yes bob, im sure that his car is the time of a flower opening in a plant of yours. Indeed

[BobMs_wht2k2]

I'm sorry, was I using the "big words" again? This stupid masters thing has me all in that mode. . .

[04 elantra cvvt]

I do have the original graphics, but not that graphic as it was put together by a different member. I might be able to work something up though.

I would just want the blue one (outline) on mine.

[rusto85]

Looks pretty awesome, I think I may get one to use when I go out to show off my car. I wonder if it's suppossed to be able to come out easily or is it suppossed to be tapped?...well I usually put my cd's and a book I read right on that area. But it always comes in handy to have some bling. :D

I would really like midnight wolf to create some hatch covers...the stainless tuscani one they have up on their website looks awesome. That would totally win points at shows for anyone that has a 5dr.

[theWorst]

How's this holdin' up jim?... i just ordered from midnightwolf...


getting my license plate bar done today..

*yay*..

here's the design...

i wonder if he can do a mission plate for my focus too... too bad the plate would be about the size of large post it notes.. lol

[KeWLKaT]

Well I have had mine for a while now, holds up fine.

[Ugzz]

did you get anything custom felix?

[KeWLKaT]

Nope just the XD logo and the little car, but I got the black plate.

[krodammi]

that looks so cool!! one more thing for my wish list ^_^ anyone know what it looks like in blue? or even the black one? need pics!!

[theWorst]

it looks dope no matter what color u get the mission plate.. as long as it matches.

[jacob]

Holy crap I want one of those for my HD.

[mlumz]

i've got the chrome one with the seoulfulracing smiley (got it from silverelantra) and it looks freaking sweet. But now I don't want to put anything in the cubby hole.

[Cypher]

its holding up fine, its got some scratches on it but I think I'm going to get some high grit sandpaper to smooth it out and then clearcoat it.