PDA

View Full Version : Catch Can quesiton


oregun
11-24-2004, 10:18 PM
I'm hoping that somebody knows what the difference between the two PCV outlets are. One is connected to the intake manifold and the other is connected to the intake tubing. I have seen pictures and DIY's for bypassing either, but never both at the same time. Why is that?

XDGT03
11-25-2004, 10:46 AM
The one that feeds back into the air intake is the high rpm one. There is little or no vapor feeding back through that one. I have had my set up for about 20k miles and my tb is clean as a whistle. I think a guy named Jay had 2 separate ones setup in his front grille at one time. I don't know what the size is since it is not really necessary.

oregun
11-25-2004, 01:24 PM
I've been doing some reading and it seems that the tube going to the air intake actually *sucks* air into the crankcase.

NorthernYankee
11-25-2004, 01:32 PM
out of the crankcase

AUTOBOT
11-25-2004, 02:42 PM
The one going into the intake sucks air and a little oil out of the crankcase. I have mine there and there is some oil in the catch.