which amp to power my AUDIOBAHN AWES12P ETERNAL SERIES 12" Subwoofer 2200W NE

[mxk6]

i have one AUDIOBAHN AWES12P ETERNAL SERIES 12" Subwoofer 2200W NE
the specs are;
12" High-performance subwoofer
3-Layer poly cellulous core cone material
180 oz. strontium magnet
Dual voice coil wound on black anodized aluminum former
Multi-connect lug lock terminals
Chrome plated 3-dimensional cast aluminum basket
Flat progressive NOMEX Spider
Aluminum basket and magnet mesh cover
RMS power handling: 1100 watts
Peak power handling: 2200 watts
Frequency response: 18 - 500Hz
Sensitivity: 92dB
what would be the best audiobahn amp to power this sub? i would like this sub to be fully powered at rms rating. and it is a dual voice coil 2 ohm

[jpjr]

Audiobahn (http://www.audiobahninc.com/frame2004.html)
Check the above link out for specific info on Audiobahn amps. They actually have a couple of amps that will fit your needs. You will probably want to wire your voicecoils in parallel for a 1ohm load, so look for an amp with that puts out the power you want in a 1 ohm load. And with those subs, you will need close to the rms power rating to make them work properly. Which also means the possible need to upgrade your charging system to properly power this audio system. What are you using to power the rest of the system?

[2loud2k2xd]

i have all audiobahn equipment in my ride. i use a 2300hct for 2-12" 1206t flame Q (1 ohm). you may be able to use the same amp i use.
chack out my ride on thew members page or my cardomain site. this may help a little. later. btw excellent choice with abahn