View Full Version : Rear Seats
A&F 01 GLS
01-31-2005, 08:28 PM
Hey I need to install new 6 by 9s in my 01 Elantra GLS and I can't seem to figure out how to :confused: change them. I've heard from the Hyundai dealer and the dealer i bought my car from that i have to take out the rear panel containing the brake lights and the stock 6x9s Please help me i would LOVE you :bowdown:
evan938
01-31-2005, 08:29 PM
oh man...this was a PITA...do a search...i know i posted something on it a while ago...took me like 4 hours 1st time i tried
A&F 01 GLS
01-31-2005, 08:44 PM
I looked and all I saw was confusion. I don't want to crack anything. Is it worth going to a shop and giving them some money to put it in? My speakers rattle a little bit because the previous owners had subwoofers. So if someone could do a DIY thingy on that that would be awesome! :)
evan938
01-31-2005, 08:47 PM
you shouldnt crack anything...the clips that hold a lot of the interior together may have a few break, but they are cheap...i replaced em all anyways, caus once you pull em out, if you use em again, they rattle really bad...i know there are like 3-4 clips that go down into the trunk that when you push em thru, they expand, so its kinda a PITA to push it together, and push it thru the hole...thats about the worst part
A&F 01 GLS
01-31-2005, 08:53 PM
So the Gray lil push buttons...and then there's black ones that hold the grey part down...so they ALL have to come up...then there are black "hooks" or "loops" and they bolt from the trunk, those have to come up, right? If you guys help me out...i'll make a DIY for everyone lol
evan938
01-31-2005, 09:13 PM
no...the back panel, that the speakers are on have some clips going into the trunk...once you get to where you can lift it up some, find out where its holding it down, and get in the trunk...there are white clips coming into the trunk...you have to push those together, and have someone lift the panel so it doesnt go back in
A&F 01 GLS
01-31-2005, 09:49 PM
ok, I'm not at my car now, I'll look tomorrow what ur talkin about. I thought i had to take out those rivets behind the seat... I'm not good w/ instructions i kinda need a visual..lol maybe i'll just have someone do it for me :drive:
evan938
01-31-2005, 10:02 PM
Rear speaker
Remove the rear seat. (Refer to page BD-54.)
http://www.hmaservice.com/xml/graphics/ES/ESKA045G.gif
Remove the partition trim.
http://www.hmaservice.com/xml/graphics/ES/ESKA045H.gif
Remove the plugs and bolts holding the rear package tray trim.
http://www.hmaservice.com/xml/graphics/ES/ESKA045H.gif
Remove the bolt holding the rear seat belt lower anchor.
http://www.hmaservice.com/xml/graphics/ES/ESKA045I.gif
Remove the rear package tray trim and disconnect the connectors.
http://www.hmaservice.com/xml/graphics/ES/ESKA045J.gif
Remove the rear speaker.
http://www.hmaservice.com/xml/graphics/ET/ETKA060A.gif
Installation is the reverse of removal.
A&F 01 GLS
01-31-2005, 10:21 PM
i love you
I just want you to know that. You are THE SHIZNIT :bowdown:
evan938
01-31-2005, 10:21 PM
love webtech...it is your friend
but you are welcome...lol
SilverElantra03
02-01-2005, 09:11 AM
webtech is my friend too!
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.