Injen SRI installed on 2004 Elantra w/MAF (PICS)

[r100s]

Hi, I ve installed an IS1375P(SRI for V6 tiburon) to a 2004 Elantra with MAF sensor.

The IS1375 comes with 3inch rubber couplers for the MAF sensor but we replaced them with 2.75inch rubber couplers.


Here are some pictures of what we installed it.
If anyone need more details on the installation I have more pictures of step by step installation... I will post them if asked.... :D

http://www.nitrousworld.com/pictures/injenelantra2004is1375p01.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p02.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p03.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p04.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p05.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p06.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p07.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p08.JPG

http://www.nitrousworld.com/pictures/injenelantra2004is1375p09.JPG

[subvibe99]

how does your ride feel with it installed? any noticible hp with the SAI? I'm thinking about doing the Injen CAI for my 04 GT but think I may regret it here in New England. Thanks for any feedback. Looks great BTW - Subvibe

[Keyan]

That bottleneck at the MAF has got to ruin the flow of the air somehow..

[2004ElantraGLS]

The SRI looks great, bro. As for the bottleneck at the MAF, I very seriously doubt that you'll loose power because of it. At least not enough to notice. I like how the filter is right there where you can see it. Having it in the fender makes it a PITA to inspect/replace/clean.

[FordFasteRR]

looks great !

Awesome job !

[Monster]

"If anyone need more details on the installation I have more pictures of step by step installation... I will post them if asked.... "

I'm interrested ;) .

[KeWLKaT]

Indeed. Any modification needed to be done?

[FordFasteRR]

i dont' see a bracket or anything to prevent the intake pipe from rubbing on any metal parts...

hopefully you have no metal to metal contact ...

:)

[r100s]

i dont' see a bracket or anything to prevent the intake pipe from rubbing on any metal parts...

hopefully you have no metal to metal contact ...

:)


You can actaully see the mount on the last picture.... it installs like the unit was made for the car...

Indeed. Any modification needed to be done?


The only modification is to trim the battery tray so that the battery can move to the left a bit......

and of course the using 2.75inch rubber couplers for the MAF sensor...

Well, I dont want to look like I am trying to sell parts here but my supplier can sell this IS1375 with 2.75inch rubber couplers instead of 3inch.

[Biff]

I was going to do this a while ago, but was told that it may not fit because the Tib. engine bay was longer. Glad to see someone did it. I had a feeling it would work. How much did that run ya? $175? Looks good by the way

[05TidalWave]

This could probably be placed in the DIY Guide!!!!!!

[05TidalWave]

I have an 05 GLS and I don;t think i have that much room there by the battery....

[importdriver05]

o5 tidal wave it will fit when u trim the battery tray i did the same install on my 05 xd, by the way that is great job there r100s

[05TidalWave]

Will the CAI for the 03/04 Tiburon Fit? Know of a DIY?

[pat]

how much, please message me with the cost and will your supplier ship to nova scotia canada

[Gregster]

What is the diameter of the pipe, 2.5", 2.75", 3"?

Thanks
Gregster

[Kens GLS]

Thats alot of money for a SRI, looks good though