Well Since everyone else . . . I will too! Boost time??

[dmdicks]

Just leave the stock injectors in and swap them at the shop. As long as your not boosting to the shop it will be fine and it takes what 5 minutes to swap injectors? LOL

[ki11er90]

I could get it towed to the shop from a friends house :p

My issue would be convincing them to tow it to a shop 45 minutes away instead of one much closer.

I am still on the fence on if I want to install everything minus injects and the intake part then just do that at the shop. Or do it all then get it towed.

[avantegt]

Do not hire a towing company for this. Just go rent a U haul trailer, strap your car down, and get someone with a truck to tow you. You won't get charged for mileage.

Much cheaper especially if your friend lets you borrow the truck.
uhaul1179713860.jpg
Like that.

[2LiterRiceEater]

Agreed, here U-Haul trailers cost $55/day, which is much cheaper than any towing company. If you have a way to pull the trailer, this is your cheapest solution.

[ki11er90]

Ive got free roadside assistance :p

[MagicMayo]

If you have a wideband I can get you a tune good enough to get you down the road. Might take some time but you will most definitely be able to drive your car to the shop

[ki11er90]

I will have one.

Pm me your phone number again, I lost it. We need find a day like 3 weeks down the road that's good for you and I can throw some cash your way and we can get this thing installed.

[ki11er90]

Wideband and Clamp on the way.

[MagicMayo]

Sweet...wish I could just buy stuff like you lol

[ki11er90]

I was telling you yesterday about all that stuff I sold :/

I wish I had all the partaking already

[MagicMayo]

Haha I know I know....I will keep my eye out for the other parts you need

[ki11er90]

Thanks man

[ki11er90]

Tapped oil pan just came in.

Checking things off the list feels good!

[ki11er90]

AEM Wideband and turbo clamp came in

[2LiterRiceEater]

We need pics homeboy!

[ki11er90]

Of what? My junk coming in?

As for pipe routing, I think I am going to use the same route as the Cai to get to the intercooler, I think that would be easiest.

for 2liter since he cant get enough of it :p

[MagicMayo]

ewwww....that oil pan needs a good bath! lol

[nick124]

It's all coming together!
How are you connecting your feed line? also, where are you going through the firewall for the AEM sensor and vacuum/boost line??

[MagicMayo]

i got something for him to use...basically t's off the oil pressure sending unit

[nick124]

Would to be able to post a link for such a thing?