blk turboed elantra [Archive] - Hyundai Elantra Forum

: blk turboed elantra



felex
10-28-2006, 01:12 PM
anyone here have a XD2 blk elantra turbo with New Jersey plates that's works @ einstein hospital in Bronx?? my freind that works @ that hospital says he knows this guy and drove that car. Personally i think he's full O sh$t.

Keyan
10-28-2006, 07:02 PM
not to my knowledge but if he's being truthful, find out.

felex
10-29-2006, 06:49 PM
my freind knows him, the guy is a male nurse at that hospital.he's supposed to return to work tuesday, either way my freind will notify me when see the car again, i'm told this guy only shelled out like $1200, so it's prolly a frankenstein set up.

felex
11-04-2006, 02:51 AM
OK, today i spoke with the guy who has a 05 elantra w/ turbo, my friend tells me that this guy is suspicious of me asking him ques about his car, hopefully i can meet with him so that he will know i'm on the level and may give me a test ride, if i'm impressed i'll be goin turbo too!

Ugzz
11-09-2006, 05:07 PM
1200 huh... dont know much about the turbos, but i wonder after seeing some other threads..

NY2002ElantraGT
11-09-2006, 08:41 PM
let me know felex, have him drive you down to my campus so i can hop in... haha

alienman
11-09-2006, 11:56 PM
Maybe its an electric turbo charger...

felex
11-10-2006, 05:20 PM
no, its a real turbo.it has a fmic

05xd
11-10-2006, 08:38 PM
no, its a real turbo.it has a fmic
Have you ever seen a FMIC CAI,yes they do exist.Look it up

mayollo072R
11-11-2006, 12:18 AM
1200 huh... dont know much about the turbos, but i wonder after seeing some other threads..

Yes is possible see this list.

1.OBX turbo manifold=200 shipped
2.T3/T4 turbo new from ebay one year warranty=225 shipped
3.XS BOV= 70 shipped
4.5 bolt flange= 22 shipped
5.3 2.5" aluminized bends= 40 shipped
6.Bar an plate FMIC= 125 shipped
7.290cc injectors=from 50 to 200 new and shipped
8.NPT fittings for oil drain and feed plus oil lines= about 100
9.SSauto wastegate with 5 psi spring= Not more than 75 shipped
10. Bov adapter 30 shipped
11. Vodoo III manual boost controler=20 shipped
12. Wastegate flanges about 20
13. FMIC piping, t bolt clamps and couplers =125
14. Custom made downpipe= less than 50

You have spent 1153 And of course you are mastermind, troubleshooting solver and the installer of everything. I've done that (exclude the WG mine was a Tial from scratch and no boost controller) but I change my turbo and, BOV for a turbonetics because of the shows. You may also need some more fmic piping and a O2 simulator.

You need to understand and have ideas to acomodate everything so it will work.

Doing this will not be safe for big boost. To go 8+ PSI of boost safely a FMU or FAC is needed. This are the cheapest way to go turbo but you will not get the max out of your setup. For that, piggy backs or standalones are required.

And...as you can see my set-up does not look like a frankestein.

felex
11-11-2006, 11:03 AM
Have you ever seen a FMIC CAI,yes they do exist.Look it up yeah, there called interfooler , i believe.

mayollo072R
11-11-2006, 03:39 PM
:abovelol: :abovelol: :abovelol: :D

felex
12-23-2006, 01:26 PM
my freind lie to me about that turbo elantra :( what an *******!

NY2002ElantraGT
12-23-2006, 01:29 PM
after all that Felex, your just finding out it was a lie? damn

you check thread on the Hyundai Mega Meet. you gotta come!

felex
02-04-2007, 05:21 PM
after all that Felex, your just finding out it was a lie? damn

you check thread on the Hyundai Mega Meet. you gotta come! ah, you still in that school? i'm back working over on bx 40