Mitsubishi wheels
+ Reply to Thread
Results 1 to 15 of 15

Thread: Mitsubishi wheels

  1. #1

    Default Mitsubishi wheels

    Does anyone know if these would fit:

    15" OZ racing wheels taken from a 2003 Mitsubishi Lancer with 12,000 miles.The bolt pattern is 4 lug,4 1/2"pcd with a 46mm offset.

    I know the bolt patter will fit but it seems everyone else is running between 38mm - 42mm offset.

  2. Remove Advertisements
    Hyundai Elantra XD
    Advertisements

  3. #2
    Senior Member yevRPS has not yet proved knowledgeable yevRPS's Avatar
    Join Date
    May 2004
    Location
    Pittsburgh
    Posts
    880

    Default Re: Mitsubishi wheels

    Quote Originally Posted by wdsfr
    Does anyone know if these would fit:

    15" OZ racing wheels taken from a 2003 Mitsubishi Lancer with 12,000 miles.The bolt pattern is 4 lug,4 1/2"pcd with a 46mm offset.

    I know the bolt patter will fit but it seems everyone else is running between 38mm - 42mm offset.
    BAM

    and

    BAM

    and before anybody else says it is your friend

  4. #3

    Default Re: Mitsubishi wheels

    You know what, I've heard different stories on what the offset of the stock 15" GT alloys really are. I took mine off and on the back read 6 15 46. Now from my unknowing eye, I would have guessed that meant 6" wide, 15" diameter, and 46 mm offset. If not, then what?

  5. Remove Advertisements
    Hyundai Elantra XD
    Advertisements

  6. #4
    scared like cheese 2GTS has not yet proved knowledgeable 2GTS's Avatar
    Join Date
    May 2004
    Location
    Lisle IL
    Posts
    1,083

    Default Re: Mitsubishi wheels

    Sounds about right to me but remember tht stock offset will not work if you are getting a rim wider than 6". And most 17"s are going to be 7" wide.

  7. #5
    Member #23 in the weeds. Tricked has picked up a wrench Tricked's Avatar
    Join Date
    May 2004
    Location
    FLORIDA
    Posts
    1,952

    Default Re: Mitsubishi wheels

    I don't have a complete side picture, but I do have a closeup.
    Attached Images

  8. #6

    Default Re: Mitsubishi wheels

    Interested in selling them ?

  9. #7
    Member #23 in the weeds. Tricked has picked up a wrench Tricked's Avatar
    Join Date
    May 2004
    Location
    FLORIDA
    Posts
    1,952

    Default Re: Mitsubishi wheels

    For the right price, anything can be for sale.

  10. #8

    Default Re: Mitsubishi wheels

    Do you have a price in mind ? Tire included ?

  11. #9
    Calf...Ankles...Cankles!! evan938 knows a lot about Elantras evan938's Avatar
    Join Date
    May 2004
    Location
    Columbus, Ohio
    Posts
    12,676

    Default Re: Mitsubishi wheels

    Quote Originally Posted by yevRPS
    ok. did the search, found this. just seeing if there was a definative answer on whether or not the tib calipers will fit behind these wheels. he said there was like 1/16th of clearance. anyone know???
    local forum post, users mom is an actual meth-head
    In the last convo i had with my Birth Giver. After I confronted her on leaving me for dead 17years prior to pursue a life of drugs and prostitution she seriously said "Rhett, there is nothing wrong with sucking cock for crack god damn it!!"

  12. #10
    Member #23 in the weeds. Tricked has picked up a wrench Tricked's Avatar
    Join Date
    May 2004
    Location
    FLORIDA
    Posts
    1,952

    Default Re: Mitsubishi wheels

    They do fit. I can take a picture later tonight to show how close the clearance is. It's verrrry close but there is no rubbing. I'd only use them for drag, though. The offset sets them in too far and the narrower tire doesn't allow for great handling. I think I might just sell two of mine.

  13. #11
    Calf...Ankles...Cankles!! evan938 knows a lot about Elantras evan938's Avatar
    Join Date
    May 2004
    Location
    Columbus, Ohio
    Posts
    12,676

    Default Re: Mitsubishi wheels

    what about a 205/55/15 tire?
    local forum post, users mom is an actual meth-head
    In the last convo i had with my Birth Giver. After I confronted her on leaving me for dead 17years prior to pursue a life of drugs and prostitution she seriously said "Rhett, there is nothing wrong with sucking cock for crack god damn it!!"

  14. #12
    Member #23 in the weeds. Tricked has picked up a wrench Tricked's Avatar
    Join Date
    May 2004
    Location
    FLORIDA
    Posts
    1,952

    Default Re: Mitsubishi wheels

    I feel that would be the largest tire you could mount on that rim.

  15. #13
    Calf...Ankles...Cankles!! evan938 knows a lot about Elantras evan938's Avatar
    Join Date
    May 2004
    Location
    Columbus, Ohio
    Posts
    12,676

    Default Re: Mitsubishi wheels

    Thats what im running on my GT wheels. someone on another board thinks it may be able to hold a 225...doesnt sound right. as long as i wont suffer handling ill be happy
    local forum post, users mom is an actual meth-head
    In the last convo i had with my Birth Giver. After I confronted her on leaving me for dead 17years prior to pursue a life of drugs and prostitution she seriously said "Rhett, there is nothing wrong with sucking cock for crack god damn it!!"

  16. #14
    Broke @$$ Fool BlackElantraGT has not yet proved knowledgeable BlackElantraGT's Avatar
    Join Date
    May 2004
    Location
    USA
    Posts
    2,648

    Default Re: Mitsubishi wheels

    How wide are the OZ wheels?

  17. #15
    Calf...Ankles...Cankles!! evan938 knows a lot about Elantras evan938's Avatar
    Join Date
    May 2004
    Location
    Columbus, Ohio
    Posts
    12,676

    Default Re: Mitsubishi wheels

    they have 195/60s on now, so i dont think theyll be more than 6". maybe 6.5, but i doubt it
    local forum post, users mom is an actual meth-head
    In the last convo i had with my Birth Giver. After I confronted her on leaving me for dead 17years prior to pursue a life of drugs and prostitution she seriously said "Rhett, there is nothing wrong with sucking cock for crack god damn it!!"

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts