Hyundai Elantra Forum banner
clutch
1-16 of 16 Results
  1. Suspension/Brakes/Drivetrain
    So my Throwout bearing is failing the clutch pedal vibrates like hell, and its hard to get her into gears in the morning. It's a shame because I know this clutch still had life in it! oh well time for a better clutch anyway! I'm strongly considering this clutch...
  2. Help!
    I had changed my clutch and never had the speedo again. No cruise control so i know the gauge didnt die Replaced wheel Speed Sensor and vehicle speed Sensor no change. I stuck my Finger in the vss hole (the one at the top back of the transmission) and i dont feel anything to turn the gear on the...
  3. Help!
    I have an 02 Elantra GT. I put a new clutch kit, flywheel, and slave cylinder in about a month ago. I removed the restrictor from the slave cylinder and bled the system. Driving to work in the morning I have no problems. I can put the pedal to the medal in 3rd and 4th. When I drive home...
  4. Help!
    So my dad attempted to reverse out of my driveway in my car and seized the stick shift..... (background.... he thinks he's a pro but tends to overestimate his skill) I'm guessing he rammed the shaft a little hard when he went to reverse. (another note.... sometimes, only sometimes.... the car...
  5. Suspension/Brakes/Drivetrain
    I am at 141k and the clutch has started to slip often, so i can't procastinate any longer :) my car is stock, dont plan on doing anything to it either. i do ride it hard some times....i am always shift down when slowing and now and then drop a gear or so to take off. i drive half freeway and...
  6. Do It Yourself Section
    Hello everyone, Im new to elantaxd and I'm hoping that someone will be able to help me with my problem.. I have a 2007 Elantra, I used the Chilton manual and also user threads here on elantraxd to change the clutch out. Love this site! I replaced the clutch, pressure plate and throwout bearing...
  7. Help!
    I just surpassed 100k on my '05 XD2 and unfortunately for me, the clutch has begun to act up. A few months ago I took it to Firestone and they were concerned that the "clutch didn't engage till it got almost to the top." I hadn't noticed any difference but they "adjusted" it for me, and said its...
  8. Suspension/Brakes/Drivetrain
    Hi Everyone, I have an 05 Elantra GLS with 115,000 miles on it. I bought the car brand new. I am beginning to notice the clutch is slipping slightly. It usually happens (not often) if I left off the clutch funky, and have to let off the gas and get back on again to catch. So I called my...
  9. Help!
    My wife’s car is a 2002 Hyundai Elantra GT with a manual transmission. We have been having problems lately with the clutch starting to slip. It looks like we are going to need to change the clutch soon. The car has 138000 miles on the stock clutch, so it is about time. I plan on doing the work...
  10. New Member Checkpoint
    In may I bought on ebay(first problem) an eClutchmasters clutch + 7 1/2LBS flywheel six puck racing combo for $407.00, now oct 5 months later my car is slipping in first and second unless I drive slow for a sec and I should add before I get any happy comments on my driving experance I have been...
  11. Help!
    so in my 04 GT sedan, i have been having a problem with the clutch. A few times when i tried to start my car, it would act as if i didnt have the clutch in. i could move it up and down and find what i like to call a "sweet spot", where the car would start, but that "sweet spot" would be...
  12. Suspension/Brakes/Drivetrain
    When still in the box, is it normal for the spring side of the disk to interfere with the cover fingers, when I place the disk, flywheel and cover together? Once its clamped down it should be ok, but I've never worked with such a small clutch before ... it tiny!!
  13. Suspension/Brakes/Drivetrain
    How do you "Break in" a new clutch? So ... how do "You" break in a new clutch??
  14. Suspension/Brakes/Drivetrain
    Well, I'm going to be having my tranny replaced soon and since its coming out I thought it might be a good time to R&R the clutch assembly. I was thinking of going with this: From the site ....
  15. Suspension/Brakes/Drivetrain
    What a difference! I had an ACT ACT-HY1-HDG6 clutch kit (ACT Heavy duty pressure plate, ACT 6 puck ceramic "racing" clutch disc, ACT throw-out bearing) installed earlier this week, and WOW! :D I'm using a stock flywheel, which seems to work fine with the new clutch and pressure plate. There...
  16. Suspension/Brakes/Drivetrain
    I also want to add to anyone reading this and whos unsure, Clutchs for all 97-01 tiburons will work fine, as will any listed for the elantras and 2.0 GK tibs. Please don't ask this question or say you can't find _____ clutch for your car. Those clutches will work fine. Any other members who...
1-16 of 16 Results
Top