Hyundai Elantra Forum banner
1 - 8 of 60 Posts

· road race warrior
Joined
·
297 Posts
IIRC, the 4x114.3 OZ edition uses the same cast OZ wheels that were found on the Evolution I and Evolution II models. 15"x6" OZ cast wheels made by Enkei is what is written on the set I have.
 

· road race warrior
Joined
·
297 Posts
What about 2006 Kia optima 11" rotors?!? They are 4x114.3, wonder if they would work.
DSM 2 piston calipers + 06 Kia Optima rotors + stainless steel braided brake lines = track day big brake kit
 

· road race warrior
Joined
·
297 Posts
Part numbers for 2006 Optima 11" Rotor + DSM Caliper swap on rockauto.com

2x Pronto BR31384 Brake Rotors $43.58
1x Raybestos RC10619 Left Front Loaded Caliper(comes with pads/hardware) $70.79
1x Raybestos RC10620 Right Front Loaded Caliper(comes with pads/hardware)$70.79

Total for upgraded brakes: $185.16 + shipping
 
  • Like
Reactions: songee623

· road race warrior
Joined
·
297 Posts
Well did some searching and seems that you can get the Raybestos Loaded calipers for cheaper on ebay. $60.50 per caliper and that is with an $8 core charge and shipping included. Also 2004 Sonata rotors will work also if you can get them cheaper, they are the same as the Optima.

On another elantra forum there is discussion that the elantra master cylinder might not be able to handle the twin piston calipers as the bore and piston size on the elantra master cylinder is much smaller than used on the XG350 or dsm cars(both use the same twin piston 43mm PBR calipers). IIRC from yesterday the elantra master cylinder had a 1.5mm smaller bore compared to the XG350 master cylinder. I don't know if this could be remedied by installing better brake lines front and rear which can reduce hose expansion and force more pressure to each caliper piston?
 

· road race warrior
Joined
·
297 Posts
Well, I got lucky and found a pair of front 07 Tiburon SE aluminum calipers with brackets, SO, I will be going that route. 11" rotors off a sonata will work with the Tiburon calipers so ill pick those up also along with some EBC red stuff pads.
 

· road race warrior
Joined
·
297 Posts
Just got my SE calipers in yesterday. Going to grab the 04 Sonata rotors/Tiburon pads tonight and some Motul RBF600 fluid for installation this weekend.
 
1 - 8 of 60 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top