Hyundai Elantra Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
I am installing my coilovers , I did the front already . Still wondering how to get to the rear .

Thanks
 

·
Registered
Joined
·
883 Posts
from Hyundai WebTech 2000
1.Loosen the bolts holding the rear seatback and remove the rear seatback assembly.
2.Remove the rear strut upper mounting nuts(3).

3.Remove the wheel and tire.
4.Disconnect the brake hose and wheel speed sensor wiring from the rear strut.
5.Remove the stabilizer bar link.
6.Remove the strut and carrier mounting bolts(2).

CAUTION
Be careful not to drop the rear strut.
7.Remove the rear strut assembly.
 

·
scared like cheese
Joined
·
1,083 Posts
Pretty much the same on a hatch but you have to remove the part of the seat next to the door and then remove the plastic peice that covers the speaker right there. Careful working around the speaker on the hatch, the bracket is very sharp and I have the scar to prove it.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top