Hyundai Elantra Forum banner

1 - 20 of 132 Posts

·
elantra expert
Joined
·
66 Posts
Discussion Starter #1
Heres my 2002 5 speed elantra

in the car:
custom cold air intake
raceland coilovers
stage 1 clutch
custom mesh grille(first pictures were taken before fabrication)
garage door seal(lip)
16" OZ superturismo wheels(dont have all 4 tires yet will post pictures soon)
car should be done 05/20/13

IMG_1776.jpg
IMG_1778.jpg
IMG_1779.jpg
IMG_1823.jpg
IMG_1857.jpg
IMG_1858.jpg
IMG_1859.jpg
IMG_1860.jpg
IMG_1863.jpg
IMG_1921.jpg
 

·
Registered
Joined
·
1,395 Posts
Not quite slammed yet, try to close the gap between the wheel and the fender :D

Looks good though, I like the OZ's.
 

·
elantra expert
Joined
·
66 Posts
Discussion Starter #7 (Edited)
there is no spacers in any of the pics but once i get all four OZ's on i will probably space the back an inch and the front a little

it slammed with the steelies. i was just trying on the OZ in the front cause i dont have all four tires yet hense the gap (the tires are smaller to add slight stretch look) but once it is finished it will be on the ground
 

·
elantra expert
Joined
·
66 Posts
Discussion Starter #9
the gap with the OZ wheels on in the picture will be gone and then i will pretty much be maxed out
 

·
lag, lag, lag, bye.
Joined
·
1,309 Posts
With the steelies it looks like my car's twin!
 

·
elantra expert
Joined
·
66 Posts
Discussion Starter #13
is the car on the ground with just the coils on the picture with the oz's?
idk what you mean really. the pictures with OZ wheels you can see that the car is not on the ground. but i will be able to go down that extra inch and then ill be maxed

With the steelies it looks like my car's twin!
haha yea i was just looking at your car. how much did it cost to turbo it
 

·
Premium Member
Joined
·
25,975 Posts

·
elantra expert
Joined
·
66 Posts
Discussion Starter #19
the holes on the OZ wheels are kinda small and the original lug nuts were just scratching the **** out of them so i got these small diameter locking lug nuts.
I want a stance look (NO rice). the lugs were kinda pushing it but they match very well with the wheels so i think there acceptable

photo (4).jpg
 

·
elantra expert
Joined
·
66 Posts
Discussion Starter #20
So the wheels were very poop when i bought them (150$ for all 4) which is very good considering there like 400 a piece when they first came out.

heres pretty much what i did

photo.jpg

photo (5).jpg

securedownload.jpg

photo (2).jpg

photo (3).jpg
 
1 - 20 of 132 Posts
Top