Hyundai Elantra Forum banner
1 - 20 of 38 Posts

· Registered
Joined
·
103 Posts
Discussion Starter · #1 ·
Ok so i was going to get some gas today and i pulled in to see another nice elantra getting gas. So i had to go and tell him about elantra xd.com and he was happy to see i liked his car. I also had to ask what he had done to the car...he said the engine only got a Ram intake and for the outside he had tint and 17's...i told him once again about this site and he said "Iight ill check it out thanks" ...he then started the car and started to pull away as he passed he said "iight kid good looks peace" and then he ****ing did a crazy long burn out:eek:..that got me thinking because it was dry out and it was crazy long, i could never get my car to do that and it was also back wheel drive wtf is that i thought all elantras were fwd? :confused: So can someone tell me what he had done to his car or how he did that because its killing me to know.
 

· Registered
Joined
·
103 Posts
Discussion Starter · #3 · (Edited)
no it was an elantra i know it was i talked to him lol im so confused???? And it had to be b.c the mark started where his back wheels were and thats also where the smoke came from. But it must have been fwd since i dont think you can make an elantra rwd. im just shocked that he was even able to burn out lol nd the rwd just made me **** lol.

I am going to be looking for him around town lol so i can ask him..and i hope he joins the site.
 

· Calf...Ankles...Cankles!!
Joined
·
12,678 Posts
this explains most of it...

"Jpac175
Mini Statistics
Age
19"
 

· Here to irritate Munky
Joined
·
2,600 Posts
well, if he had lots of bux he could have got the power train out of a sante fe and wedged it in to an elantra but that'd be real big bux. You can put virtually any engine / trans in any car if you've got enough money. I've seen 350 v8's in corvairs, 302 v8's in pintos and once, a toyota i4 in a 1929 model a.

And yeah, you can fry the tires on a "stock" elantra if it's a 5 speed. I've done it, turn off the TCS get your rpms up to about 3500 and let a rip. You'll fry 'em all the way up to 5000 rpm, no prob. (until you blow your clutch) Oh, and certain road surfaces are better for fryin tires than others. That nice smooth concrete at gas stations is great, blacktop isn't as good.
 

· Registered
Joined
·
1,420 Posts
Maybe he locked up the e-brake, then floored it, but did not have enough power to break the front tires lose, and only the back skidded. :eek2:
 

· The Euro Guy
Joined
·
1,117 Posts
Option A.: He skidded with the e-brake
Option B.: It was not an elantra.
Option C.:You looked at the car backwards
Option D.:He had mad money and spent 5000$ on the drivetrain of his XD to swap with the tucsons(or old sante fe) trans.
Option E.:pete hit a curb.
 

· Registered
Joined
·
103 Posts
Discussion Starter · #10 · (Edited)
Option E.:pete hit a curb.
lmao i really did laugh at that knowing how pete likes curbs.:D

and for all the others i do think it was b.c it was a 5 speed and i went back to look at the spot and there is alot of rocks to help out lol sorry for my stupid post but i really wanted to know lol.

Wheres the video?

I'm leaning towards E!

sorry no vid lol and yes i say E too.
 

· 7 psi tunned by poweraxel
Joined
·
3,203 Posts
hmmm... where you drinking? or had you had anything to drink that day?

are you sure he did not do a burnout in reverse as he waved bye to you?
im sorry im going with C here. LOL.
 

· Here to irritate Munky
Joined
·
2,600 Posts
Good choice pete, I'm sure the folks here will get a even bigger kick out of reading your posts that you crashed the genesis.
 
1 - 20 of 38 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top