Hyundai Elantra Forum banner

Upper Strutbar for XD

3186 Views 9 Replies 5 Participants Last post by  Elantra2005
Hey. I'm into this thing quite a while and I can't make out what should I choose .
Does strutbar going to make any difference on bone stock suspension ? I saw something like so : http://www.ebay.com/itm/Aluminum-Si...ash=item3ac284c19c:g:z6kAAOSwubRXIriO&vxp=mtr

Tnx folks
1 - 10 of 10 Posts
It slightly will, but you'll feel a better suspension once you upgrade things like swaybar, swaybar bushing [front & rear] lowering spring or coilovers to go with that strut bar. My 2 cents
It slightly will, but you'll feel a better suspension once you upgrade things like swaybar, swaybar bushing [front & rear] lowering spring or coilovers to go with that strut bar. My 2 cents
Yeah I know but I have a problem because I have kind of cable that sits in the place.
See less See more
is just a ground cable. either relocate it or bolt it on top, if you get a strut bar make sure that there are no pivot points,get one that is one piece like the DC for the tiburon
http://www.ebay.com/itm/IN-STOCK-DC...ash=item43df15c8d0:g:vooAAOSw6dNWToAa&vxp=mtr

or the Tiburon OEM
http://www.ebay.com/itm/New-Strut-T...ash=item58c1e6c8ad:g:VvgAAOSwNSxVGP6g&vxp=mtr

or the ultra racing
http://www.ebay.com/itm/HYUNDAI-COU...ash=item256b7e1441:g:WYgAAOxyTkJSMuQF&vxp=mtr

any pivot place ill be a weak pint for flex
is just a ground cable. either relocate it or bolt it on top, if you get a strut bar make sure that there are no pivot points,get one that is one piece like the DC for the tiburon
http://www.ebay.com/itm/IN-STOCK-DC...ash=item43df15c8d0:g:vooAAOSw6dNWToAa&vxp=mtr

or the Tiburon OEM
http://www.ebay.com/itm/New-Strut-T...ash=item58c1e6c8ad:g:VvgAAOSwNSxVGP6g&vxp=mtr

or the ultra racing
http://www.ebay.com/itm/HYUNDAI-COU...ash=item256b7e1441:g:WYgAAOxyTkJSMuQF&vxp=mtr

any pivot place ill be a weak pint for flex
Yeah I know its groud cable but there something else near it if you can make out.
Thanks for the links btw
Yeah I know its groud cable but there something else near it if you can make out.
Thanks for the links btw
Are you talking about the cruise control?
If so there is a write up on newtiburon for relocating it to the firewall
there is a diy on cc custom bracket on here by silentwolf when he did his kdm bar.
I have a cruise control in my 02 & I have a Tiburon mussa front strut bar and it doesn't interfere with anything
Is that Cruise control unit? Because I don't have the function in my car .
Sorry for the bump but I've checked and that little square thing is not Cruise Control its Acceleration sensor. Just a FYI
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top