Hyundai Elantra Forum banner
1 - 1 of 1 Posts

·
Teach
Joined
·
4,103 Posts
If you are hooking up 2 separate amps, I recommend going with a 2 gauge or 0 gauge wire to a distribution block then 6-8 gauge to the amps. You need a fuse at least 10-20% higher up front than both amp fuses. If your amps have a 40 amp fuse, I suggest getting a 100 amp fuse or curcuit breaker for up front. The reason is the resistance and length of the wire will draw more power up front than out back.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top